Otto Bock Axon-Bus, Instructions For Use Manual

Page: 44 / 284

44
Battery charger Explanation
Battery is charging, battery 50% charged
Battery is charging, battery 75% charged
Battery is fully charged, battery 100% charged
Battery charge level
Charging
receptacle Event
Battery is fully charged
Battery charge level is 100%
Battery charge level is over 50%
Battery charge level is less than 50%
12.3 Glossary
The term "Axon" stands for A daptive e x change o f n europlacement data. The Axon-Bus is an
Ottobock innovation for the field of exoprosthetics: a data transmission system, derived from
safety-related bus systems in the aviation and automobile industries. For the user this means
enhanced safety and reliability because of a considerably reduced sensitivity to electromagnetic
interference in comparison with conventional systems.
12.4 Directives and manufacturer’s declaration
12.4.1 Electromagnetic environment
This product is designed for operation in the following electromagnetic environments:
•
Operation in a professional healthcare facility (e.g. hospital, etc.)
• Operation in areas of home healthcare (e.g. use at home, use outdoors)
Observe the safety notices in the section "Information on proximity to certain areas" (see
page 29).
Electromagnetic emissions
Interference meas­
urements Compliance Electromagnetic environment directive
HF emissions accord­
ing to CISPR 11 Group 1/class B The product uses HF energy exclusively for its
internal functioning. Its HF emissions are
therefore very low, and interference with neigh­
bouring electronic devices is unlikely.
Harmonics according
to IEC 61000-3-2 Not applicable –
power below 75 W –
Voltage fluctu­
ations/flicker accord­
ing to IEC 61000-3-3 Product meets the
requirements of the
standard. –