Otto Bock 8E38 8 Series, Instructions For Use Manual, Page: 28 / 228

28
matically performed up to the maximum gripping force (130 N) as needed. FlexiGrip takes effect
starting at the maximum gripping force. When there is no longer a load, the SensorHand Speed
grips with the previous gripping force again.
Control with two electrodes
Opening: Proportional via the OPEN electrode.
Closing: At maximum speed with short muscle signal at any level over the ON threshold on
the CLOSE electrode.
Open Close
Muscle signal via the electrode
Speed:
Proportional, 15 mm/s to 300 mm/s
Muscle signal via the electrode
Speed:
Constant, 300 mm/s
Initial gripping force Automatic gripping force
readjustment FlexiGrip function
10 N Up to max. 130 N Takes effect starting at the
maximum gripping force
Control with one electrode and one switch
Opening: Proportional via the OPEN electrode.
Closing: At maximum speed by briefly activating the switch.
Open Close
Muscle signal via the electrode
Speed:
Proportional, 15 mm/s to 300 mm/s
Signal via the CLOSE side of the switch
Speed:
Constant, 300 mm/s
Initial gripping force Automatic gripping force
readjustment FlexiGrip function
10 N Up to max. 130 N Takes effect starting at the
maximum gripping force
Control with one switch
This program can be used in combination with any MyoBock switch.
Opening: At maximum speed as long as the OPEN side of the switch is activated. The hand
then remains open.
Closing: At maximum speed by activating the CLOSE contact of the switch.
Open Close
The hand opens as long as the OPEN side of
the switch is activated
Speed:
Proportional, 15 mm/s to 300 mm/s
Signal via the CLOSE side of the switch
Speed:
Constant, 300 mm/s
Initial gripping force Automatic gripping force
readjustment FlexiGrip function