Otto Bock 50R231, Instructions For Use Manual

Page: 10 / 88

10
CAUTION
Reuse on other persons and improper cleaning
Skin irritation, formation of eczema or infections due to contamination with germs
► The product may be used by one person only.
► Clean the product regularly.
NOTICE
Improper use and changes
Change in or loss of functionality as well as damage to the product
► Use this product with care and only for its intended purpose.
► Do not make any improper changes to the product.
NOTICE
Contact with oils, salves, lotions or other products that contain oils or acids
Insufficient stabilization due to loss of material functionality
► Do not expose the product to oils, salves, lotions or other products that contain oils or acids.
4 Handling
INFORMATION
► The daily duration of use and period of application are generally determined by the physi­
cian.
► The initial fitting and application of the product must be carried out by qualified personnel.
► Instruct the patient in the handling and care of the product.
► Instruct the patient to see a physician immediately if any exceptional changes are noted (e.g.
worsening of the complaint).
4.1 Selecting the Size
1) Measure the waist circumference approx. 2 cm above the iliac crest.
2) Determine the brace size (see size chart).
4.2 Adaptation
> The patient is standing.
> The hook-and-loop closures on the abdominal strap are open.
> The pull cable is fully loosened.
1) Place the upper part of the brace over the shoulders like a backpack.
2) Center the back plate of the brace (see fig. 1).
3)
Optional:
Adjust the height position of the abdominal strap. In order to do so, detach the
Mechanical Advantage Pulley System from the hook-and-loop fastener on the back plate and
reposition it (see fig. 2).
INFORMATION: Ensure that the position of the hook-and-loop surface is the same on
both sides.
4) Guide the brace around the torso and apply equal force to both sides to pull it forward.
5) Attach the right side to the left side of the abdominal strap (see fig. 3). Ensure that the hook-
and-loop sections are lying flat against each other and are not in contact with clothing or skin.
6) Pull the end of the pull cable forward and attach it to the abdominal strap with the hook-and-
loop fastener.
7) Pull the ends of the straps forward (see fig. 4).