OTIS GEN II OI-6000, Operation Manual

Page: 45 / 72

OPERATION SETTINGS
OI-6000-X-X-X-X-O OPS_GUIDE_REV 3.1 39
4 OPERATION SETTINGS
At the time of installation, when the power is first applied to the OI-6000, the unit is automatically powered on and begins
the startup sequence. During the 1-minute warmup, the display will show a countdown of the time remaining until the system
start-up is complete. The Otis logo and the unit information will also flash on the display screen and, at the end of the
countdown, the device will be in normal operating mode.
4.1 POWERING THE DEVICE
4.1.1 POWERING OFF
Powering off the device stops the operation of the unit. The product settings and configuration, as well
as the operation settings, including the null and calibration of the sensor, will be unaffected.
1. Press and hold the SUB button for approximately 6 seconds, until “OFF” shows on the display
screen.
The display screen will continue to show “OFF” for the duration of time that the unit is powered off, as
long as long as uninterrupted power is supplied to the unit.
4.1.2 POWERING ON
Powering on the device begins the operation of the unit, automatically initiating the system start-up cycle
and 1-minute warmup period. The OI-6000 will be in normal operating mode at the completion of the
system start-up.
1. Press the ADD button once to turn the unit on.