Össur MIAMI TLSO 456, Instructions For Use Manual

Page: 7 / 62

7 6
PANEL & BELT ADJUSTMENTS
• To heat mold the panels, use a heat gun (350 °F/175 °C).
• The belt arms can be trimmed anteriorly where the Belt Ends are
folded, or posteriorly by detaching the belt arms from the Hook and
Loop Strip adjacent to the Belt Compression System
(Fig. 11) . If
trimming posteriorly, ensure the Belt Ends are retained and folded per
Fig 6.
MAINTENANCE / PRODUCT CARE / CLEANING AND CARE
• Miami TLSO is designed for minimum maintenance and care
• The padded covers may be removed from the rigid panels for washing
• Hand-wash using mild soap and rinse thoroughly
• Air dry flat
• Do not machine wash or place in tumble dryer
REPORT A SERIOUS INCIDENT
Important notice to users and/or patients established in Europe:
The user and/or patient must report any serious incident that has
occurred in relation to the device to the manufacturer and the competent
authority of the Member State in which the user and/or patient is
established.
DISPOSAL
The device and packaging must be disposed of in accordance with
respective local or national environmental regulations.
LIABILITY
Össur does not assume liability for the following:
• Device not maintained as instructed by the instructions for use.
• Device assembled with components from other manufacturers.
• Device used outside of recommended use condition, application, or
environment.