Osprey 800e Series User Guide
Osprey by Variosystems
29
Height
Select the height of the input from the drop-down list.
Video Buffers
Select the number of buffers to pass to the DirectShow filter from the drop-
down list.
Default Frame
Rate
This field is only on the Osprey 845e. It displays the frame rate sent to the
application. You can change the frame rate if needed.
Note: These values are only used if the application does not explicitly request a specific
resolution.
Input pin mode
Displays the input port setting.
Remove VBI lines
from video
Indicate the number of VBI lines that are passed through after the start of the
video.
Enable 3G SDI
support
This field is only on the Osprey 845e. Select this check box to enable 3G SDI
support. Enabling this feature will disable SDI inputs C and D.
Osprey 845e: When using the
Remove VBI lines from video
and
Enable 3G SDI support
fields, you need to restart the
driver for changes to take effect.
Summary of Contents for 800a
