Osprey 800a, User Manual

Page: 51 / 80

Osprey 800e Series User Guide
Osprey by Variosystems 47
VGA Settings tab
This tab is only for the Osprey 820e. Use the VGA Settings tab (Figure 30) to set the video graphics
adapter (VGA). This tab does not display for an SDI or HDMI only input.
Figure 30. VGA Settings tab
The VGA Settings tab has the following controls:
Active VGA Entry
Information Enter the Resolution, Frequency, Index, Top Margin, Left Margin, and Mode for
the video graphics adapter.
Top Margin
Left Margin Click on the top margin from the drop-down list. The Top and Left Margins
allows the adjustments of the VGA input signal supplied on either MFI-X or
SDI-X channels of the Osprey 820e.
Note: These values are only applied when you have selected the VGA Input from the crossbar.
Permanent Select the Permanent check box to make the margin sizes permanent. Any
margins changes you apply will cause the input signal to be reacquired.
Start Preview Click to view the margin settings in real time.
Stop Preview Stops the preview.