10279-D01-00
Page 102 of 142
This information is the property of Oshkosh Specialty Vehicles and is considered to be confidential. The contents may not be used, either
partially or wholly, for any purpose inconsistent with which it was produced. This information may not be reproduced or disclosed without prior
express consent.
14.2 Weekly
Maintenance
1. Clean RF door trim with a mild cleaning solvent and wipe with a clean cloth.
2. Lubricate the Platform Lift side rails and pivot points with an ample amount of ZEP 2000
OSV Part Number 6100811.
3. Check the primary and downstream blower A/C filters. Clean and replace if necessary. A/C
must be “OFF” to check and replace filters. Refer to
for
location.
4. Check the oil and water levels in the generator and refill if necessary.
5. Check the electrolyte levels in the DC batteries and fill if necessary using only distilled
water.
6. Check all running lights, marker lights, brake lights, and turn signals.
7. Check tire pressure and verify that all wheels are within 2 psi of the pressure specified by
the tire manufacturer.
Check the tires before every trip for wear, cuts breaks, cracks,
defects, objects caught or penetrating the tire carcass and for proper
inflation. Check tire pressure when the tires are cool and maintain the
pressure molded into the sidewall. Do not operate a trailer with tires
that have the internal reinforcing wires or belt showing or less than
2/32” tread depth, when measured at a major tread groove. See 49
CFR Sec. 570.9(a).Replacement tires MUST BE Radial.
8. Check the fluid level in the hydraulic reservoir using the site glass. Add fluid if necessary.
Use only AWF all weather fluid Automatic Transmission Fluid.
