background image

PAGE 1 OF 15 

0521 IH-2917

π

  H-2917

ADJUSTABLE 
PALLET TRUCK

1-800-295-5510

uline.com

OPERATION

TECHNICAL DATA

WARNING! Operator must read and understand 
instructions here and on truck prior to use.

On the handle of the pallet truck, you will find the control 

lever, which can be set in three positions.  

(See Figure 1) 

  

 

 

 

 

 

 

 

 

 

 

- UP = to raise the forks
- NEUTRAL = to move the load
- DOWN = to lower the forks

1.  If the forks elevate while pumping in the NEUTRAL 

position, turn the setting screw clockwise until 

pumping the handle does not raise the forks and the 

NEUTRAL position functions correctly.

2.   If the forks descend while pumping in the NEUTRAL 

position, turn the setting screw counterclockwise until 

the forks do not lower.

3.  If the forks do not descend when the control lever is 

in the DOWN position, turn the setting screw clockwise 

until raising the control lever lowers the forks. Then 

check the NEUTRAL position as per steps 1 and 2.

4.  If the forks do not lift while pumping in the UP position, 

turn the setting screw counterclockwise until the forks 

elevate while pumping in the UP position. Then check 

the NEUTRAL and DOWN position as per steps 1, 2 

and 3.

NOTE: When viewing the truck from the handle  
side, the setting screw is located on the right  
side of the pump above the right wheel. The  
truck will lower faster or slower depending on  
how far in or out the screw is adjusted.

Figure 1

U

P

D

OWN

N

Para Español, vea páginas 4-6.

Pour le français, consulter les pages 7-9.

MODEL

H-2917

Capacity

5,500 lbs.

Max. Fork Height

7.7

"

Min. Fork Height

3.0

"

Fork Length

45½

"

Overall Fork Width

21-27

"

Fork Wheel Diameter

3" Polyurethane

Steering Wheel Diameter

7" Polyurethane

Net Weight

204 lbs.

Summary of Contents for H-2917










Reviews: