10279-D01-00
Page 78 of 142
This information is the property of Oshkosh Specialty Vehicles and is considered to be confidential. The contents may not be used, either
partially or wholly, for any purpose inconsistent with which it was produced. This information may not be reproduced or disclosed without prior
express consent.
9.4
HVAC Humidifier System
All settings for the humidity system are preset at the factory. Under no
circumstances should factory presets be altered.
Proper humidity levels must be maintained to protect sensitive electronic
equipment.
The humidifier is responsible for maintaining the humidity levels within the mobile unit. The settings
for the humidifier are set to meet the medical system manufacturer’s specifications. Under no
circumstances should the settings of the humidifier be altered. In order for the humidifier to function
properly, the water tank level must be maintained at all times.
Figure 42: Humidifier Tank
Exterior Fill:
The exterior fill connection must be used to allow the mobile unit water
supply tank to be filled.
Humidifier:
The humidifier is integral to the HVAC system and provides the required
humidity to the mobile unit per the medical manufacturer’s requirements.
Humidity Controller:
The internal humidity of the mobile unit is controlled as part of the HVAC
system. The setting is preset at the factory to comply with the medical
system manufacturers requirements.
Humidity Sensor:
Maintains an accurate reading of the humidity levels inside of the mobile
unit.
Overflow Drains:
If by chance the water tank is over filled, overflow drains are provided. The
drains lead through the floor to the exterior of the mobile unit.
Water Supply Tank:
The water tank stores water for the humidifier.
