Page 26
Installation and Operation Manual - Inspire 2000 Insert
6.3.1 Adjustment
The gasket seal may be improved with a simple latch mechanism adjustment to increase or
reduce the pressure on the gasket:
1. Open the door and unscrew the four nuts
(A)
holding the bracket
(B)
in place.
2. To increase the pressure on the gasket, remove as much washers
(C)
as necessary. To decrease
the pressure on the door, add washers
(C)
.
3. Reinstall the bracket
(B)
with the nuts
(A)
.
C
B
A
Figure 17: Door adjustment with bracket
It is also possible to fix the handle angle by adjusting the door latch mechanism, located on the
right hand side opening of the insert.
D
E
4. Unscrew the nuts
(D)
and lift the door latch
mechanism
(E)
to increase the pressure on
the door. Lower the mechanism
(E)
to release
pressure.
Figure 18: Door handle angle adjustment
www.northlineexpress.com
1-877-734-2458
