Adjustable Fireplace Tray
G704
Instructions for Use
Please read and retain these instructions for future reference
v002: 07/09/20
Dimensions
5cm (H), 38cm (D)
47cm wide in back, 68.5cm wide in front; expands up to
59.5cm wide in back, 81cm wide in front.
Material
Phosphate treated cold rolled steel
Caution: This tray may discolour if hot ashes are collected
from the fireplace. Always let the ashes cool before
placing onto this tray.
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Phillips screwdriver needed for assembly (not included).
Assembly
Step 1:
Adjust both pieces of tray to fit the size
required for your fireplace.
Step 2:
Make sure to align the holes on both
sides of the tray.
Step 3
Insert the bolts and nuts into the hole and tighten a nut around each
screw.
Step 4
Make sure the bolts and nuts are tight to steady the tray for safety and
security.
Step 5
Set the tray in place under the andiron or grate of your fireplace.
