Page 16
Installation and Operation Manual - Inspire 2000 Insert
4.1 Cold Hand
The cold hand is a handle, supplied with the insert. It allows to open the door and avoid burns.
To open, insert the cold hand into the opening on the right side of the insert. Pull on the cold
hand to open the door. Push to close the door. The cold hand should not remain on the insert
when it is in use and should be kept outside the heat radiation zone of the appliance.
Figure 8: Opening on the right side of the insert
Figure 9: Pull on the cold hand to open the door.
4.2 Blower Operation
A blower is already installed on this insert. It is
located behind the bottom louver of the insert.
Its function is to increase airflow through the
heat exchanger and improve hot air circulation
in the room. When used regularly, the blower
can provide a small increase in efficiency, up
to 2%. However, it should not be used as a
way to gain more output from an insert that
is undersized for the space it is intended to
heat.
Figure 10: Blower location
Ensure the blower cord is not in
contact with any surface of the
insert to prevent electrical shock
or fire damage. Do not run cord
underneath the insert.
www.northlineexpress.com
1-877-734-2458
