9.2.2. Zone status indication by "Lind-9" ICD indicators
Violation of each zone the Control Panel is indicated on ICD by separate red
ZONE
1…8
indicators.. After the zone has been recovered, the related indicator extincts.
If any zone is activates when armed:
●
sounder (siren) is enabled;
●
built-in sounder of ICD emits periodical signals;
●
activated zones are displayed by glowing of red
ZONE 1...8
LEDs;
●
EVENT REPORTING
LED starts fashing. When the message is transmitted to CMS and
confrmation is received, LED extincts.
9.2.3. Indication of troubles (faults) on "Lind-9" ICD
When any operation troubles of the burglar alarm occur,
READY
LED extincts, and yellow LEDs
fash frequently.
LEDs indication is accompanied by beeps of “Lind-9” inner sound unit.
1.
Prime power fault (230V)
is displayed by fashing of
FAULT
and
POWER 220V
LEDs.
2.
Battery discharged or No battery
is displayed fashing of
FAULT
and
BATTERY
LEDs.
3.
No CMS connection
is displayed by fashing of
FAULT
and
CMS CONNECTION
LEDs.
4.
No communication between "Lind-9" and Control Panel
is displayed by fashing of
FAULT
and
CP CONNECTION
LEDs.
5.
Control Panel internal program failure
is displayed by fashing of
FAULT
and
SYSTEM
.
9.2.4. “Supervisor” and “Installer” passwords
Attention! The default passwords of the delivered devices are empty. The initial
setting of "supervisor" and "installer" passwords is performed using "Confgurator" program
in “Electronic Keys” tab. See the details of confguring in "Lun Devices Confguration
Manual". The Manual is available for download at
http://
ortus.io
Specify four-digit numeric codes of the "supervisor" and "installer" in the corresponding entry
felds as shown on Figure 3.
Fiiure 3. Password entry
БААИ.425523.003ИУ
Rev. en_19
14
