Origio MARS 1200 CLASS II, User Manual

Page: 70 / 75

70 Version 4.2: Aug 26, 2015
XII. MAINTENANCE
a. Field Certification
The workstation must be inspected on an annual basis. The annual certification comprises the following checks:
• Functional test of the device.
• Checking all components for possible damage.
• Checking the filter state (particle count).
• Verifying device airflows
• Checking the airflows
• Checking and calibrating the heated surface and the heated glass (MARS IVF only)
b. Service
HEPA Filter replacement:
As the filter replacement requires access to potentially contaminated portions of the cabinet, filters must only be
replaced by adequately trained and authorized service personnel.
Filter replacement:
Before filters are replaced the appropriate decontamination and safety procedures must be
completed. After the filter replacement, a certification test must be performed
Sample chamber illumination tube
To access or exchange the light tube, the laminator air panel must first be removed.
1. To access the laminator air panel it is first necessary to remove the microscope
if this creates an obstacle.
2. The laminator air panel has to be removed by pulling on the two fixing tags
simultaneously.
3. Remove the laminator air panel out of the workstation
4. The fluorescent tubes are mounted in rotating sockets. Rotate the tube carefully into
the removal position, and then remove it from the socket. Insert the new tube and
rotate it into the working position.
5. Replace the laminator air panel
6. Replace the microscope if required.
Specifications:
MARS
size
Watt Base Ø / Length Lumen Ra Kelvin
Color
No
Color
Order
No
900 15 G13 26/438 mm 950 Im 80-89 Ra 3000 K 830
Warm
White
WG0504
1200 30 G13 26/895 mm 2400 Im 80-89 Ra 3000 K 830
Warm
White
WG0505
1500 36 G13 26/1200 mm 3350 lm 80-89 Ra 3000 K 830
Warm
White
WG0506
1800 58 G13 26/1500 mm 5250 Im 80-89 Ra 3000 K 830
Warm
White
WG0507