Origio MARS 1200 CLASS II, User Manual

Page: 59 / 75

Version 4.2: Aug 26, 2015 59
XI.
HEATED SURFACE
See also the section “Working Heated Surface and ORIGIO Light Source”.
The heated surface is only applicable on the following MARS IVF models:
•
MARS 900 IVF
•
MARS 1200 IVF
•
MARS 1500 IVF
•
MARS 1800 IVF
•
MARS 1800 DUAL
•
MARS 1800 MP
There are two types of heated surfaces for your workstation:
•
Electrical heating (standard solution, described in this manual).
•
Liquid heating with a water circulator pump (please refer to the user manual of the water circulator pump,
not included in this manual)
The heated area is indicated by a brushed steel effect in the work surface.
Operational Characteristics
The heated surfaces, will be heated to 37ºC, and are controlled by an accurate sensor and a control processor.
CAUTION. Placing of large hot or cold masses on the heated elements will affect the
regulation process and should be avoided during normal operation.
Placing a hand will also draw heat from the surface, therefore please avoid placing fingers
or a hand on the surface during warming up or during the calibration of the controller.