Origio MARS 1200 CLASS II, User Manual

Page: 26 / 75

26 Version 4.2: Aug 26, 2015
2. Mount the beam splitter as to position the port either on right or left.
3. Mount the other components like the C-mount and the LV-TV tube to the
beam splitter.
4. Fix the lens cap to the camera
5. Fit the camera to the beam splitter.
6. In order to avoid having the cables lose in the working chamber, connect
all the cables through the original ORIGIO pole of the stereomicroscope.
The cables will run below the table plate to be connected to the monitor
and to an external power outlet.
Note: It is also possible to run the cables through the side windows
openings for routing cables to be connected to a PC or external monitor.
7. To connect the cables, remove the frame around the monitor by
unscrewing the screws, Remove the frame and the cover glass. Use a
window suction tool (not provided) to pull the monitor out of the back wall.
Place delicately the monitor on the table plate that has been covered to
avoid scratches. Run the camera cables from below the table plate
through the back wall and connect them to the monitor. Adjust the
contrast or brilliance of the monitor.
Replace the monitor in the back wall and screw the frame with the cover
glass.
NOTE: The front glass should not touch the microscope eyepieces
tubes or the eyepieces as this may refrain a good visual and
magnification of the sample. If this occurs, contact your ORIGIO
local distributor for assistance.
Please refer to the manual of the microscope and camera manufacturer for
the installation, instructions and cleaning.
•
Liquid Bath Heating Controller: