Origio MARS 1200 CLASS II, User Manual

Page: 63 / 75

Version 4.2: Aug 26, 2015 63
To select the desired value press the UP or DOWN arrow.
To store the desired value press enter or wait 10 seconds.
To reset the value, press and hold the information button simultaneously with the
exit button.
Standby
This section describes how to put the controller on standby, or resume from standby.
Press down the standby button for 3 seconds.
Keypad lock
The keypad lock can be used to protect the settings from intentional or unintentional changes.
Press the information button to enter the INFO menu.
Use the UP and DOWN arrows to select LOC (keypad lock). Set the parameter
LOC = YES to lock the keypad.
To unlock the keypad, change the setting to LOC = NO.
c. Operating the heated areas
Normal Operation
The temperature controller will maintain the work surface temperature at 37 °C and will not require an y user
interaction after the initial setup performed by a service technician.
Checking the temperature
The actual temperature of the surface is shown on the display (OUT1). L1 will show the set point temperature.