Orientalmotor aSTEP AZ Series, User Manual, Page: 166 / 180

Information
166
6 T
roubleshooting
Parameter ID
Name Description Initial value
Dec Hex
425 01A9h
Overvoltage information
(INFO-OVOLT)
[AC power input driver]
Sets the generation condition of the overvoltage
information (INFO-OVOLT). [AC power input driver
only]
[Setting range]
120 to 450 V
435
426 01AAh
Undervoltage information
(INFO-UVOLT)
[AC power input driver]
Sets the generation condition of the undervoltage
information (INFO-UVOLT). [AC power input driver
only]
[Setting range]
120 to 280 V
120
427 01ABh
Overvoltage information
(INFO-OVOLT)
[DC power input driver]
Sets the generation condition of the overvoltage
information (INFO-OVOLT). [DC power input driver
only]
[Setting range]
150 to 630 (1=0.1 V)
630
428 01ACh
Undervoltage information
(INFO-UVOLT)
[DC power input driver]
Sets the generation condition of the undervoltage
information (INFO-UVOLT). [DC power input driver
only]
[Setting range]
150 to 630 (1=0.1 V)
180
431 01AFh Tripmeter information (INFO-TRIP)
Sets the generation condition of the tripmeter
information (INFO-TRIP).
[Setting range]
0: Disable
1 to 2,147,483,647 (1=0.1 kRev)
0
432 01B0h Odometer information (INFO-ODO)
Sets the generation condition of the odometer
information (INFO-ODO).
[Setting range]
0: Disable
1 to 2,147,483,647 (1=0.1 kRev)
0
433 01B1h
Cumulative load 0 information
(INFO-CULD0)
Sets the generation condition of the cumulative
load 0 information (INFO-CULD0).
[Setting range]
0 to 2,147,483,647
0
434 01B2h
Cumulative load 1 information
(INFO-CULD1)
Sets the generation condition of the cumulative
load 1 information (INFO-CULD1).
[Setting range]
0 to 2,147,483,647
0
435 01B3h Cumulative load value auto clear
Clears the cumulative load when operation is
started (at the ON edge of the MOVE output).
[Setting range]
0: Disable
1: Enable
1
436 01B4h Cumulative load value count divisor
Sets the divisor of the cumulative load.
[Setting range]
1 to 32,767
1
444 01BCh INFO-USRIO output selection
Selects the output signal to be checked in the
INFO-USRIO output.
[Setting range]
Output signal
_
p.151
128:
CONST-OFF
445 01BDh INFO-USRIO output inversion
Sets the output logic of the INFO-USRIO output.
[Setting range]
0: Not invert
1: Invert
0