Orientalmotor aSTEP AZ Series, User Manual, Page: 119 / 180

Direct data operation
119
4 PR
OFINE
T c
ommunica
tion
6. Check the operation 1 is completed, and set the following data.
Direct data operation of the operation 2 is started.
• Output (host controller → driver)
Byte Description Setting value Note
8 to 11 Direct data operation position 3,000 3,000 steps
• To execute direct data operation of the operation 2, set a different value from the operation 1 in
the “position” of the operation 2.
• If a value other than the “position” is changed, direct data operation of the operation 2 will not be
executed.
3
4 6
5
Write value Write value
TRIG
Data
DCMD-RDY
TRIG_R
READY
MOVE
Motor operation
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON