Orientalmotor aSTEP AZ Series, User Manual, Page: 110 / 180

IO data
110
4 PR
OFINE
T c
ommunica
tion
„
When an area of assignable monitor is used
z
Area of IO data used
Input (driver
→ host controller)
Byte Description
40 to 55 Assignable monitor 0 to assignable monitor 3
z
Flow that data is read from
Host controller
Sets the “Assignable monitor address” parameter.
Driver
The value of the parameter set in the “Assignable
monitor address” parameter is read every
communication cycle.
Communication cycle
Assignable monitor n *
* n: 0 to 3
z
Related parameters
Parameter ID
Name Description Setting range Initial value
Dec Hex
25600 6400h
Assignable monitor
address 0
These are used to set
the parameter ID to
show on the assignable
monitor. Set from items
of “3 Monitor
commands” on
p.124.
124: Driver temperature
25601 6401h
Assignable monitor
address 1
125: Motor temperature
25602 6402h
Assignable monitor
address 2 109: Cumulative load
monitor
25603 6403h
Assignable monitor
address 3
127: Tripmeter