11
Getting started
In Australia some phone wall sockets are the old "non modular" style. If you have this type
of wall socket you will need to purchase a modular converter convertor plug (not supplied).
These can be obtained from most electronic stores.
Attach the belt clip
There is a belt clip included in the box that you can attach to the back of your handset if required.
Simply turn the handset over and slot the belt clip securely into the two recesses located on either
side of the handset.
Your PRO910 is now ready for use!
Phone location
Make sure your phone:
•
Is on a dry, flat and stable surface
•
Isn’t a trip hazard with its power cable
•
Is at least one metre from other electrical appliances
•
Isn’t exposed to smoke, dust, vibration, chemicals, moisture, heat and direct sunlight.
Please take care that the power supply isn’t obstructed by furniture.
prIvate exchanges:
If your phone is going to use a private exchange (for example, if you have to dial ‘0’ to get an
outside line, please follow the steps on page 76).
