3
5.■
DC Power Connector
Red - Po), Black - Negative(-).The output voltage of the connected DC
power supply must be 13.8V, do not connect the radio to a 24V storage power
supply. If the current supplied to the radio is insufficient, the display may darken
during transmission or the transmitting output power may drop significantly.
NOTE:
Connect the DC power cable to a 13.8V DC power supply. Note: make
sure the correct polarity is observed, connect red cable to positive (+) and black
cable to negative (-) terminals.
■
◆
Fuse Replacement
One fuse is installed in the supplied DC power cable. If a fuse blows or the radio
stops functioning, track down the source of the problem first, then replace the
damaged fuse with a new, rated one.
NOTE:
Please power off radio before replacing the fuse, the required fuse is
DC15A/32V.
■
■
Dimensions
Unit: mm
155
137
25.5
87.5
98.5
155
65.5
35
51.4 65.5
Summary of Contents for MX1100G
Page 48: ...Ref 12102020...
Page 49: ......
