Oricom MX1100G, Instruction Manual

Page: 29 / 49

25
■
◆
Receiving an Group Call
When a Group call is received:
•
The alarm sounds for 2 minutes.
•
“RCVD GROUP CALL” is displayed.
1.
Press softkey [
] to turn OFF the alarm.
•
The channel that is assigned by the caller is automatically selected after 10
seconds by default.
2.
Press the softkey for the next operation.
■ →
Press [ ]: Ingores the call and returns to the operating screen.
•
“ ” bli nks continuously until you display the call message.
•
The call is saved in the DSC Log.
■ →
Press [ ]: Pauses the countdown until the assigned channel is auto-
matically selected.
NOTE: [
] is not displayed if the “CH Auto SW” item is set to “Manual”.
•
Select [
] to resume the countdown.
•
The call is saved in the DSC Log.
→
Press [
]: Accepts the call.
•
The assigned channel is automatically selected.
•
The call is saved in the DSC Log.
→
Press [
]: Closes the Group call, then returns to the operating screen.
→
Press [
]: The receiver call’s information is displayed.
■
■
All Ships Call
An All Ships call enables you to announce a message to all the ships within range.
■
◆
Sending an All Ships Call
1.
Press softkey [
], the “OTHER DSC” screen is displayed.
NOTE: You can also display the “OTHER DSC” screen by selecting the “DSC
Call” item on the Menu screen.
2.
Select “Type”, then press [OK] , “MESSAGE TYPE” is displayed.
3.
Select “All Ships”, then press [OK] or softkey [
].
•
Returns to the “OTHER DSC” screen.
4.
Select “Category”, then press [OK] .
5.
Select a category of the call, then press [OK] or softkey [
].
6.
Select “Channel”, then press [OK] .
7.
Select a channel to assign, and then press [OK] or softkey [
].
•
The assigned channels are preset by default.