26
8.
Press softkey [
] to send the All Ships call, ”Transmitting All Ships Call” is
displayed, and then the assigned channel is automatically selected.
NOTE:
If Channel 70 is busy, the radio stands by until the channel becomes
clear.
9.
Hold down
[PTT]
to communicate.
■
◆
Receiving an All Ships Call
When an All Ships call is received:
•
The alarm sounds
•
”RCVD ALL SHIPS CALL” is displayed.
1.
Press softkey [
] to turn OFF the alarm.
•
The channel that is assigned by the caller is automatically selected after 10
seconds by default.
2.
Press the softkey for the next operation.
■
→
Press [
]:
Ingores the call and returns to the operating screen.
•
The call is saved in the DSC Log.
•
“
” blinks continuously until you display the call message.
■
→
Press [
]:
Pauses the countdown until the assigned channel is auto-
matically selected.
NOTE:
[
] is not displayed if the “CH Auto SW” item is set to “Manual”.
■
→
Press [
]:
Accepts the call.
•
The assigned channel is automatically selected.
•
The call is saved in the DSC Log.
■
→
Press [
]:
Closes the All Ships call, then returns to the operating screen.
■
→
Press [
]:
The receiver call’s information is displayed.
■
■
Position Request Call / Polling Request
Call
When you want to know information about the current location of a ship, you can
send a Position Request call.
Summary of Contents for MX1100G
Page 48: ...Ref 12102020...
Page 49: ......