Store a Redial Number into the Call Block list
1.
Follow Steps 1 and 2 in
“redial a number”.
2.
Press MENU/OK and UP or DOWN to select
ADD TO BLIST
.
3.
Press MENU/OK to edit the number if necessary.
4.
Press MENU/OK to confirm to save it in Call Block List.
Delete a Redial Number
1.
Follow Steps 1 and 2 in
“redial a number”.
2.
Press MENU/OK and UP or DOWN to select
DELETE
, press
MENU/OK,
CONFIRM?
is shown.
3.
Press MENU/OK to confirm.
Delete the Entire Redial List
1.
Follow Steps 1 and 2 in
“redial a number”.
2.
Press MENU/OK and UP or DOWN to select
DELETE ALL
.
3.
Press MENU/OK,
CONFIRM?
is shown.
4.
Press MENU/OK to confirm.
Find the Handset
You can locate the handset by pressing PAGE on the base
station. All the handsets registered to the base will produce the
paging tone and
“
PAGING
” is displayed on the LCD. You can stop
the paging by pressing TALK ON/TALK OFF/C/OK/MENU on any
handset or PAGE on the base again.
Note: If there is an incoming call during paging, the phone will ring
with the incoming call instead of paging.
Make an Internal Call
This feature is only applicable when there are at least two registered
handsets. It allows you to make internal calls, transfer external calls
Summary of Contents for CARE620-1
