![background image](http://html1.mh-extra.com/html/oricom/care620-1/care620-1_user-manual_1650652019.webp)
•
XX/FF Flashing XX alternatively with FF: There are XX new
voice messages received where XX is from 01 to 59 and the
TAM memory is full.
•
FF Flashing FF: TAM memory is full and there are no new
messages, only old messages are kept in TAM memory.
•
- /XX Flashing XX alternatively with - -: Time is not set and
there are XX new voice messages received where XX is from
01 to 59.
•
- Flashing - -: Time is not set and there are old voice messages
kept in the TAM memory only (no new voice messages).
•
XX Steadily ON: Playing the current XX incoming message.
•
A1/A2 Steadily ON: Playing the current outgoing message
(OGM) where A1 is the Answer & Record OGM and A2 is the
Answer Only OGM.
•
XX/An Flashing XX alternatively with An: XX new incoming
message is now recording. An denotes that the incoming
message recording is in progress.
•
rA Flashing: Remote access is in progress.
•
LX Steadily ON: Indicates the current volume level where X is
from 1 to 8 (non-cyclic).
PAGE
•
Button is located underneath telephone base, roughly in
the middle, but towards the lower right hand corner
•
Press to page your handset(s). It will ring for
approximately 60 seconds.
•
Press and hold to enter registration mode for 5 seconds
Summary of Contents for CARE620-1
