T
his Quick Guide is not a substitute to the user manual and addresses only
a limited scope of features and functions of your
scala rider G9
. Use it to
look up basic functions and commands while you are on the road without the
user manual.
This Quick Guide can be printed and folded for easy reference while on the
road, or it may be viewed directly on your smartphone or tablet.
scala rider G9 Unit
1
|
GENERAL FUNCTIONS
Power ON / OFF
Press
for 2 seconds
• ON: 3 BLUE f ascending tone
• OFF: 3 RED f decending tone
Volume
Tap or to adjust and set volume of current audio source
Mute
Tap and simultaneously
Battery level
indicator
In Standby, press
for 2 seconds
• Blue LED = Full charge
• Purple LED = Half charge
• Red LED = Almost empty
Hear Your Buddy
Name
In Standby, tap
and simultaneously
Paired Device
Indication
In Standby, press
and
for 2 seconds
If “One+8” Buddies are within range, purple LEDs flash for
2 seconds
Group Signal
Tap
twice
Enable / Disable
Spoken Status
Announcements
Press
and
for 2 seconds
2
|
SETTINGS MENU
Enter Menu
In Standby, press and for 2 seconds
Exit Menu
Press for 2 seconds
3
|
MAIN UNIT LED INDICATION
None
scala rider G9 is OFF
1 BLUE flash every 3 seconds
Standby mode
– No active audio
2 BLUE flashes every 3 seconds
Active mode
– Call in progress / music or other
audio source is ON
1 RED flash every 3 seconds
Standby mode
– Battery is low
2 RED flashes every 3 seconds
Active mode
– Battery is low
Solid RED
Charging
4
|
VOICE CONNECT (VOX)
VOX Sensitivity
(Default: Medium)
Adjust via the Settings Menu, the App or the
Cardo Community
.
High:
Use this setting if it is difficult to activate VOX
Low:
Use this setting if it is too easy to activate VOX
VOX Operation Mode
VOX can be set to activate the Voice Command (default) or to
start an Intercom Call via the
Cardo Community
or the App
Enable / Disable VOX
(For Intercom calls only)
In Standby, press and for 2 seconds
• Enabled
: Blue flash for 2 seconds
• Disabled
: Red flash for 2 seconds
5
|
VOICE COMMANDS
1. In Standby, tap
or speak any word loudly to activate VOX
2. Speak a Voice Command from the table below:
Current Mode
Desired Action
Say this:
Standby / FM / A2DP
/ AUX
“One+8” Intercom Call
<<Buddy Name>>
Intercom call with A or B
“Call Intercom”
Standby
Start A2DP
“Music ON”
Turn on FM
“Radio ON”
FM Radio
Turn off FM
“Radio OFF”
Next Station Preset
“Next Station”
Previous Station Preset
“Previous Station”
A2DP Music
Next track
“Next track”
Previous track
“Previous track”
Stop / Pause A2DP
“Music OFF”
6
|
PAIRING BLUETOOTH DEVICES:
MOBILE PHONE/GPS/A2DP MUSIC PLAYER
Bluetooth Channel 1 pairing mode
In Standby, press
for 5 seconds
Bluetooth Channel 2 pairing mode
In Standby, press for 5 seconds
To pair a GPS, when LEDs begin rapidly alternating, tap .
7
|
PHONE CALLS
Answer a call
Tap
or speak any word loudly to answer by VOX
Reject a call
Remain silent for 15 seconds, or press
for 2 seconds
End a call
Tap
Voice Dial*
(if supported by
mobile phone)
Tap
and follow the prompt from the mobile
Redial*
Double-tap
Hot Dial**
Double-tap
or tap
and
simultaneously
Set default mobile***
While on a phone call, press
for 5 seconds
Change default mobile
In Standby, press and
for 5 seconds
INTERCOM CONFERENCE MODE
Add/Remove Channel “A”
to/from a call
Tap while on a phone call
Add/Remove Channel “B”
to/from a call
Tap while on a phone call
*This feature is not available during intercom or mobile calls.
** Before using Hot-Dial, configure the number via the
Cardo Community
.
*** If 2 mobile phones are paired directly to your scala rider G9, set one to use as
default for outgoing calls.
Channel A / MP3
Channel B / FM
Voice Command
Volume / Rewind
Mobile button (On / Off)
Volume / Forward
