![background image](http://html1.mh-extra.com/html/oricom/care620-1/care620-1_user-manual_1650652056.webp)
41
1.
Press and hold PAGE on the base station for about five seconds,
the base station enters registration mode.
2.
P r e s s M E N U / O K t h e n U P or D OW N to s e l e c t
REGISTRATION.
3.
Press MENU/OK and select the destination base you would
like to register to.
4.
Press MENU/OK, you are requested to enter the 4-digit
system PIN.
5.
Enter the 4-digit system PIN.
6.
Press MENU/OK to confirm.
If the handset registration is successful, you will hear a confirmation
tone and the <antenna icon> of the handset will stop flashing. The
handset
will automatically be allocated the next available handset
number.
Reset Your Phone
You can reset your phone to the default settings. After reset, all
personal settings and call list entries will be deleted, but your
phonebook and Call block list remain unchanged.
1.
Press MENU/OK then UP or DOWN to select
DEFAULT
.
2.
Press MENU/OK then you are requested to enter the 4-digit
system PIN.
3.
Enter the 4-digit system PIN.
4.
Press MENU/OK to confirm.
5.
Press MENU/OK to re-confirm.
Summary of Contents for CARE620-1
