![background image](http://html1.mh-extra.com/html/oricom/care620-1/care620-1_user-manual_1650652049.webp)
34
Change the System PIN Code
The default system PIN code is 0000.
1.
Press MENU/OK then UP or DOWN to select
BS SETTINGS
.
2.
Press MENU/OK then UP or DOWN to select
CHANGE PIN
.
3.
Press MENU/OK, you are then requested to enter the 4-digit
system PIN.
4.
Enter the old system PIN.
5.
Press MENU/OK and enter the new system PIN.
6.
Press MENU/OK and enter the new system PIN again.
NZ Setting
1.
Press MENU/OK then UP or DOWN to select
BS SETTINGS
.
2.
Press MENU/OK then UP or DOWN to select
NZ
.
3.
Press MENU/OK then UP or DOWN to select
ON
or
OFF
.
4.
Press MENU/OK to confirm.
Remark: when set to ON, the New Zealand area code
management is enabled.
Handset Settings
Set the Ringer Melody for Internal Calls or External Calls
1.
Press MENU/OK then UP or DOWN to select
HS SETTINGS
.
2.
Press MENU/OK then UP or DOWN to select
RING SETUP
.
3.
Press MENU/OK then UP or DOWN to select INT RING or
EXT RING
4.
Press MENU/OK then UP or DOWN to select the desired ringer
melody (a total of 10 melodies for your selection) for internal
Summary of Contents for CARE620-1
