63
3.
Press OK on handset for registration.
4.
Input pin code (default 0000 which should be same as base
unit), press OK, the handset will display
PLEASE WAIT
. It takes
max. 90 seconds to complete the registration process.
5.
When registration completes, the handset will emit confirmation
beep,
and the base LED will be off. If registration fails, the
handset displays
REGISTER
, and emit error beeps. Please
repeat the above procedure.
Note: Oricom CARE620-1 and CARE820 can support a
maximum 4 cordless handsets including main handset.
Maintenance and Guarantee
Maintenance
•
Please clean your
equipment’s
surfaces with a soft, fluff-free cloth.
•
Never use cleaning agents or solvents.
Customer Support
If you have any problems setting up or using this product you will
find useful tips and information in the Troubleshooting section of this
user
guide as well as “Frequently Asked Questions” on our website
www. oricom.com.au.
If you have further questions about using the product after
reviewing the resources above or would like to purchase
replacement parts or accessories please call our Customer Support
Team.
Important
Please retain your purchase receipt and attach to the back page
of this user guide as you will need to produce this if warranty service
is required.
Summary of Contents for CARE620-1
