background image

29

ENG

 SPECIFICATIONS

Weight Dimension

Base unit : 200g (without battery)

Base unit : 122 x 132 x 76mm (HxWxD)

Handset : 102g (without battery)

Handset: 138 x 52 x 27mm (HxWxD)

Technical details

Standard

Digital Enhanced Cordless Telecommunications (DECT)

Frequency range

1880 to 1990 MHz (band width = 20 MHz)

Channel  band width

1.728 MHz

Modulation

GFSK

Speech coding

Adaptive Differential Pulse Code Modulation (ASPCM) at 32 kbit/s

Communication range

Up to 300m in open space/ Up to 50m in building

Base power supply

220V / 50Hz for the base

Handset power supply

2 rechargeable batteries AAA, Ni-MH 600mAh

Handset battery charging time

15 hours

Operating time

Standby:   150 hours
Talking :    10 hours (speakerphone off)
Handsfree about 1 hour

Operating temperature

0 C to 40 C

Storage temperature

-20 C to 60 C

Temperature monitoring range

0 C to 40 C

 WARNINGS

Your ThermoDECT telephone has been designed to provide you with many years of reliable service. To
ensure that you use the product safely and correctly, observe the following safety warnings:

• Your ThermoDECT telephone is dependent on AC power source for operation, and may not work

during power and telephone outages.

• Certain types of rechargeable batteries, such as Ni-MH rechargeable batteries, may require

special handling and disposal. Check with your local waste disposal authorities for instructions.

• Do not use your ThermoDECT phone in or near water, as this can cause damage to the unit and

personal injury through electric shock.

• Do not use your ThermoDECT telephone out-of-doors during a thunderstorm. Unplug the base unit

from the telephone line and power source when there are severe storms in your area.

• Do not attempt to open or modify your telephone.

• The product, specifications and contents of this user manual are subject to change without further

notice.

• Figures and display examples in this user manual are for reference only, and may differ slightly

from the actual product.

©  2002 Oregon Scientific. All rights reserved.

Language

English

INT  melody

1

PIN CODE

0000

Handset  name

HANDSET

Ring volume

3

Dial  mode

D T M F

Low  batt  indicator

O N

Ear volume

2

Ring  priority

none

Out  of  range  indicator O N

Phonebook

empty

PABX  codes

none

Keyclick

O N

CLID  list

empty

Auto  answer

O N

Redial list

empty

Default  Settings:

~

~

~

~

Summary of Contents for ThermoDECT TD 339
































Reviews: