20
ENG
Changing the ring tone for an intercom call
You can change the ring tone for an intercom call to differentiate internal from external calls. To change
the ring tone:
1. Press the
button.
2. Press
to select Handset Menu from the options.
3. Press
.
4. Press
to select Int. Melody from the options.
5. Press
.
6. Press
or
to select the desired melody.
7. Press
to confirm your selection.
Tip: To return to standby mode, press and hold the
button.
Making a 3-way conference call
If you have more than one handset registered with the base unit, you can make 3-way conference calls
between an external call party and two internal handset holders. To make a 3-way conference call:
1. Establish contact with the external party by either placing a call to that person, or answering an
incoming call.
2. Press
to make an intercom call to another handset.
3. Enter the handset number that you wish to page.
Result: The handset you paged rings. The internal party can answer the call by pressing the
button.
4. Press and hold the
button for approximately 2 seconds, until you see the word
Conference flash on the display and hear a confirmation beep.
Result: All three parties are connected into the call, and can talk together.
Tip: You can end a 3-way conference call exactly as you would any other call. Just press the
button.
Using the call waiting feature
If you receive an external call while you are talking to someone through the intercom, you will hear a
call waiting tone. To answer the incoming call:
1. Press the
button to terminate the intercom call.
Result: The external call rings.
2. Press
again to answer the external call.
Transferring calls between handsets
You can transfer an external call from one handset to another if you have registered more than one
handset with your ThermoDECT telephone. To transfer a call:
1. During a telephone conversation, press the
button to place the caller on hold.
2. Enter the handset number (1 – 5) to which you wish to transfer the call.
Result: The handset you paged rings, with EXT and INT flashing on the LCD display. The internal
party can answer the call by pressing the
button.
3. (Optional) Hang up the telephone to transfer the call once someone answers. If no one answer,
press
to terminate the page and return to the caller.
