14
ENG
3. Press
.
4. Press
to select PABX setup from the options.
5. Press
.
6. Press
again to select Code 1 from the options.
7. Enter the security PIN for the base, followed by the prefix. For more information about the security
PIN, refer to the next section.
Example: The security PIN for John’s ThermoDECT telephone is “0000”. To dial an external
number in his PABX, he must dial “9”, and then the number. John would enter “0000” and “9” for
this step.
8. Press
to confirm your entry.
9. (Optional) Repeat Steps 6 - 8 to set up a second prefix.
Tip: To return to standby mode, press and hold the
button.
To select a pause duration:
1. Follow Steps 1 – 5 above to enter the PABX setup menu.
2. Press the
button to select Pause setup from the options.
3. Press
to confirm your entry.
Tip: To return to standby mode, press and hold the
button.
Changing the security PIN
Your ThermoDECT telephone is shipped with the security PIN (Personal Identification Number) set to
“0000”. You can change this to any 1-8 digit PIN you choose.The security PIN is used for resetting the
system and identifying the telephone in a PABX (Private Automatic Branch Exchange) or local
telephone network.
To change the security PIN:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
4. Press
to select PIN code from the options.
5. Press
.
6. Enter the new PIN number. The PIN number will not show on the display for security reasons.
7. Press
to confirm the change.
Tip: To return to standby mode, press and hold the
button.
Resetting your telephone system
Resetting the system clears all information that you have stored on your telephone – such as telephone
book entries, caller ID history, and the baby call (emergency call) number – and returns your
ThermoDECT telephone to its default settings (shown on page 29). There are two ways to reset the
system – with a security PIN, and without a security PIN.
To reset the system with a security PIN:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
