Operating instructions RPG ONE, RPG 1.5, RPG 2.5
1 Safety instructions
orbitalum tools
gmbh
(02.10)
MT_RPG ONE, RPG 1.5, RPG 2.5_BA_04_790036766_00.doc
5
Danger of being injured by sharp cutting edges
:
Do
not
touch the running tool while the machine is operating.
►
Wear safety gloves.
►
Tie up long hair (hair-net); do not wear loose-fitting clothes.
►
Use the tube squaring machine only when the tube has been clamped.
►
No chips or workpiece parts should be removed from the processing area
as long as the machine is running and the tool is not yet at rest.
Danger of eyes and hands being injured by hot and sharp-edged chips
flying around
:
Do
not
touch the running tool while the machine is operating.
►
Always wear protective goggles and safety gloves.
►
Remove chips only with safety gloves. Remove long and bent chips with
pincers and/or side cutting pliers.
Danger of death by electric shock
If the mains cable is damaged, live parts may cause death if touched directly.
:
Do
not
leave the power cord of the electric motor near the processing area
and/or the tool.
:
Do
not
run the machine unattended.
Danger to life by unintentionally touching the ON/OFF switch
►
The machine may only be operated using a fault current (FI) protect switch.
►
Allow the machine to run to a standstill and remove the power plug from the
power supply unit or take out the rechargeable battery before any change
of tools, cleaning, maintenance, setup and repair operations.
WARNING
WARNING
DANGER
