6 Operation
Operating instructions RPG ONE, RPG 1.5, RPG 2.5
20
(02.10)
MT_RPG ONE, RPG 1.5, RPG 2.5_BA_04_790036766_00.doc
orbitalum tools
gmbh
6.3
Setting up and/or replacing clamping shell
1. Select correct clamping shell according to tube dimension (refer to
chap. 2.8.4, p. 12).
2. Unscrew the clamp handles:
Turn out the release handle (1) (the end of the release handle must be
flush with the inside of the housing).
Unscrew the clamp handle (large handle) (2) (the end of the clamp handle
must be flush with the inside of the housing).
Screw out clamping shell retainers (small handles) (3) till free play is
achieved (the end of the handles must be flush with the inside of the
housing).
RPG ONE (Cordless)
RPG 1.5 (Cordless)
RPG 2.5 (Cordless)
6.3.1
Remove a clamping shell
X
If a clamping shell that has already been assembled needs to be replaced,
it can now be removed by simply pressing on it.
RPG ONE (Cordless):
RPG 1.5 (Cordless),
RPG 2.5 (Cordless):
2
3
3
2
3
1
