2 Design of the product
Operating instructions RPG ONE, RPG 1.5, RPG 2.5
10
(02.10)
MT_RPG ONE, RPG 1.5, RPG 2.5_BA_04_790036766_00.doc
orbitalum tools
gmbh
2.7
RPG 2.5 (Cordless) tool mounting plate
The tool mounting plate of the RPG 2.5 (Cordless) offers different tool holder
assembly possibilities, according to type of application:
•
Facing (1) of 6.35 - 12.7 mm (¼" - ½")
•
Facing (2) of 12.7 - 63.5 mm (½" - 2½")
•
Beveling (3), dimension range as per bevel tool
X
The tool holder (4) should be assembled in one of the 6 fastening threads
(5) as a function of the above listed processing type and tube outer
diameter.
X
The bigger the outer diameter of the tube, the further apart are the
fastening threads selected for the tool holder (see arrows).
X
For exact positioning, install the tool holder (4) with a multifunctional tool in
the groove guide (6) and screw it in as a function of the desired processing
type along the groove guide and using the correct fastening thread (5).
X
The groove guide (6) is provided with fine lines, so as to facilitate the
positioning of the tool holder (4).
Tool recipient without tool holder
Tool recipient with tool holder
Notes
1
2
3
5
4
6