Operating instructions RPG ONE, RPG 1.5, RPG 2.5
8 What to do if?
orbitalum tools
gmbh
(02.10)
MT_RPG ONE, RPG 1.5, RPG 2.5_BA_04_790036766_00.doc
33
8
What to do if?
8.1 Troubleshooting
The following table gives you the possible causes while troubleshooting.
Problem Possible
cause
Remedy
Feed is too big or battery is almost
empty.
X
Disassemble tool holder and
take out tube from the machine.
X
Remove chip using side cutting
pliers and file off section.
X
Introduce carefully during new
processing.
Tool (MFW) is causing a “step”
during facing.
MFW or WH loose.
X
Screw in MFW or WH tightly.
Battery completely discharged.
X
Charge battery (refer to attached
operating instructions of the
charger).
X
Use spare battery.
Rechargeable battery power system
of the RPG Cordless does not work.
Battery not connected to RPG
Cordless.
X
Connect battery to RPG
Cordless.
Tool tends to vibrate.
Speed too high.
X
Reduce speed
(see chap. 6.6, p. 25).
Strong tendency to vibrate.
Axial or radial play in the
components.
MFW loose.
X
Check machine for freedom from
play.
X
Check MFW on fixed seat.
The processed tube is jagged or has
a burr which is too big.
MFW blunt.
X
Replace
MFW.
8.2 Servicing/after-sales
service
For ordering spare parts, refer to the separate spare parts list.
For troubleshooting, please contact your competent branch office directly.
Please indicate the following details:
•
Machine type:
–
RPG ONE (Cordless)
–
RPG ONE (Electric)
–
RPG 1.5 (Cordless)
–
RPG 1.5 (Electric)
–
RPG 2.5 (Cordless)
–
RPG 2.5 (Electric)
•
Machine
no.:
(refer to name plate)
