![background image](http://html.mh-extra.com/html/orbitalum/gf-4-avm/gf-4-avm_operating-instructions-manual_1648241008.webp)
1 Notes on safety
Operating instructions GF 4 (AVM / MVM)
4
(01.08)
MT_GF 4_BA_04_790142762_01.doc
orbitalum tools
gmbh
1.3
Working with safety in mind
“Make your contribution to safety in the workplace.”
•
Report any unusual response from the machine to the person responsible
immediately.
•
Be aware of safety aspects at all times during work.
•
When working with the GF 4, wear protective goggles, safety gloves, safety
shoes, and ear protection.
•
Tie up long hair (hair-net); do not wear loose-fitting clothes.
Attention:
Jewellery and ties may get caught in the rotating parts.
•
Check that the work piece is correctly clamped.
•
Switch on the machine only when the pipe has been clamped.
•
Once the machine is running, keep hands away from the tools.
•
Before changing tools, cleaning or performing any maintenance,
adjustment or repair work, disconnect the mains plug and allow the
machine to run to a stop.
•
Fault current (FI) protection in the mains supply line, provided by the
customer, is required.
•
When working with the AVM: in case of danger, immediately press the
EMERGENCY OFF button.
•
When working with the AVM, the AVM will stop automatically after each
cutting process. If you are working manually, switch off the machine after
each working cycle (ON/OFF switch of the pipe cutter) and allow the
machine to run to a stop.
•
Be aware of environmental influences: do not use electric tools in damp or
wet conditions. Ensure lighting is adequate. Do not use in close proximity to
flammable liquids or gases.
•
Do not carry the machine by the cable and do not use the machine to pull
out the plug. Protect the cable from heat, oil and sharp edges (chips).
Danger of being injured by sharp cutting edges
:
Keep hands
away
from the running tool.
X
Wear safety gloves.
X
Tie up long hair (hair-net); do not wear loose-fitting clothes.
X
Use the pipe cutter only when the pipe has been clamped.
WARNING
Summary of Contents for GF 4 AVM
Page 51: ......