![background image](http://html.mh-extra.com/html/orbitalum/gf-4-avm/gf-4-avm_operating-instructions-manual_1648241017.webp)
Operating instructions GF 4 (AVM / MVM)
3 Features and scope of application
orbitalum tools
gmbh
(01.08)
MT_GF 4_BA_04_790142762_01.doc
13
3
Features and scope of application
3.1 Features
The pipe cutter GF 4 is distinguished by the following characteristics:
•
Enhanced safety due to stationary pipe - rotating tool.
•
A restart inhibit function prevents the machine from starting in an
uncontrolled way after it has been re-connected to the electric mains or
after the voltage supply has been re-established following a power failure.
•
Self-centering
vice.
•
Low-maintenance gearbox with oil lubrication.
•
Speed-controlled pipe cutter motor.
•
Burr-free cutting surface and deformation-free pipe cross-section.
•
Cold machining process.
•
Quick cutting process.
•
The ability to produce “V” and “Y” weld preps using a bevel cutter with the
option of cutting and beveling simultaneously.
•
Cutting of elbows.
•
Quick tool change.
•
Line laser for optical identification of the cutting area.
•
Locking mechanism of the slide housing prevents unauthorized usage
and theft.
GF 4 AVM:
•
The intelligent control system of the AVM monitors the feed force
continuously, depending on the torque and the parameter settings.
•
The operator position guarantees utmost protection against hot chips
flying around.
•
Reducing the amount of physical effort for the operator.
•
Manual operation is still possible.
Summary of Contents for GF 4 AVM
Page 51: ......