10
4b. First unscrew/loosen the nut
a bit, then place filter unit onto
pipette, then screw/tighten the
nut onto the filter unit.
Tip: practice the above with one
hand, using the other hand to
hold the main Head.
5. Insert temperature probe.
Rotate/twist while gently
pushing until in right position. If
right position is found, then
push probe upwards with
moderate force until it clicks in
well.
6. Connect vacuum hose as
shown in picture.
7. Attach jar with push-rotating
motion. The jar is held in place
by an O-ring inside the Head.
Summary of Contents for AirSTAR
Page 1: ...Operation manual Version 1 8 February 4th 2018...
Page 2: ......
Page 12: ...7 Image 4 Image 5...
Page 13: ...8 Image 6...
