Orban OPTIMOD-FM 5518, Operating Manual

Page: 66 / 217

2-28
INSTALLATION ORBAN MODEL 5518
b) Enter seconds slightly ahead of the correct time.
c) Wait until the entered time agrees with the correct time. Then press the
E
NTER
T
IME button to set the clock.
B) Press the
S
ET
D
ATE button.
a) Set today’s date, using the days, month, and year buttons.
b) Press the
E
NTER
D
ATE
button.
C) Press the
D
AYLIGHT
T
IME button.
a) Using the Daylight Saving (
DT M
ONTH and
DT W
EEK ) buttons, set the month
and week when Daylight Saving Time (Summer Time) begins, or
O
FF .
b) Using the Standard Time (
ST M
ONTH and
ST W
EEK ) buttons, set the month
and week when Daylight Saving Time (Summer Time) ends.
Note that setting
DT M
ONTH
, DT W
EEK
, ST M
ONTH
,
or
ST W
EEK
to
O
FF
will
defeat Daylight Time functionality.
c) Press the
Escape
key to back out of the daylight saving screen.
D) (Optional) Press the
S
TATION
ID
button to specify your station’s identifier (call
sign or call letters).
a) Use the knob to select characters. Use the
Prev
and
Next
buttons to move
the cursor.
b) When you are finished, press
S
AVE
.
2. Navigate to Setup > Next > Automation.
If the
A
UTOMATION button reads
D
ISABLED , hold it down and turn the knob to en-
able automation.
This button allows you to easily enable or disable all automation events
without having to edit individual automation events.
3. To add an automation event:
A) Push the
A
DD
E
VENT
button
.
B) Choose whether you wish to program an event that occurs only once or an
event that follows a daily or weekly schedule.
C) For events that occur only once:
a) Use the
Prev
and
Next
buttons to move the cursor over the word “
DAILY:
”
and turn the knob so that is reads “
DATE:
” instead.
b) Use the
Prev
and
Next
buttons to move the cursor to the day, month, and
year when the automation event will occur. Set the desired values with the
knob.
c) Use the
Prev
and
Next
buttons to move the cursor set the hour, minute, and
second (in 24-hour format) when the automation event is to occur. Set the
desired values with the knob.