Orban OPTIMOD-FM 5518, Operating Manual

Page: 162 / 217

5-8
TROUBLESHOOTING ORBAN MODEL 5518
b) Right click the name of your connection and access “
P
ROPERTIES
.”
c) Go to the “
G
ENERALS
”
TAB and select the “
C
ONFIGURE
”
button.
d) Set the
M
AXIMUM
S
PEED
(
BPS
)
to
115200
.
e) Select
OK
and try your connection again.
T) If you see: “Error 619: The specified port is not connected.”
Make sure the
I
NTERFACE
T
YPE on the 5518 is correct:
a) On the 5518, go to
S
ETUP
> N
ETWORK
& R
EMOTE
> P
C
C
ONNEC .
b) Set
PC C
ONNECT to
D
IRECT .
c) Try your connection again.
Troubleshooting Windows 2000 Modem Connect:
If you are having trouble establishing a connection, check your New Connection’s
properties to make sure they are set up correctly:
A) Click “Start > Programs > Accessories > Communications > Network and
Dialup Connections” to bring up the Network Connections screen.
B) In the “Network Connections” window, right-click “5518 - Modem” and
choose “Properties.”
C) The “Properties” window opens for “5518 – Modem”.
D) Click the “Properties” button.
E) Select the “General” tab and make sure that “Connect Using” displays the
correct modem and port.
F) Click the “Configure…” button.
G) Set the “Maximum Speed (bps) to 115200.
H) Check the “Enable hardware flow control,” make sure all other hardware fea-
tures are unchecked. Then click “OK.”
I) Click the “Networking” tab on the “Properties” window.
J) Set “Type of dial-up server I am calling” to “PPP: Windows 95/98/NT4/2000,
Internet.”
K) Select the “Settings” button and make sure all PPP settings are unchecked.
Then click “OK.”
L) In “Components checked are used by this connection,” uncheck all except for
“Internet Protocol (TCP/IP).”
M) Select “Internet Protocol (TCP/IP)” and then click the “Properties” button. The
“Internet Protocol (TCP/IP) Properties” window opens.
N) Choose “Obtain an IP address automatically” and “Obtain DNS server address
automatically”