manualshive.com logo in svg

Oracle X6 series, Administration Manual

Share
Download
Oracle X6 series Administration Manual Download Page 90

View Current Server Power Consumption (Oracle ILOM)

90

Oracle X6 Series Servers Administration Guide • April 2016

View Current Server Power Consumption (Oracle

ILOM)

1.

To view current server power consumption in the Oracle ILOM web interface:

a.   

Log in to the Oracle ILOM web interface.

For instructions, see 

“Accessing Oracle ILOM” on page 21

.

b.   

In the navigation pane, click Power Management > Consumption.

The Power Consumption page appears.

c.   

Review the Actual Power property in the Power Consumption page.

2.

To view current server power consumption in the Oracle ILOM command-line

interface (CLI):

a.   

Log in to the Oracle ILOM CLI.

For instructions, see 

“Accessing Oracle ILOM” on page 21

.

b.   

Type 

show /System/Power

.

c.   

Review the 

actual_power_consumption

 property.

Related Information

■

Monitoring Power Consumption, 

Oracle ILOM User's Guide for System Monitoring and

Diagnostics, Firmware Release 3.2.x

 at 

http://www.oracle.com/goto/ilom/docs

View Power Allocated to Server Components

(Oracle ILOM)

1.

To view the power allocated to server components in the Oracle ILOM web

interface:

a.   

Log in to the Oracle ILOM web interface.

For instructions, see 

“Accessing Oracle ILOM” on page 21

.

b.   

In the navigation pane, click Power Management > Allocation.

The Power Allocation page appears.

Summary of Contents for X6 series































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands