Oracle X6 series Page 61 Administration Manual Download

Page: 61 / 126

Modify iSCSI Virtual Drive Properties in UEFI Boot Mode (BIOS)

Configuring Storage Resources

Set the Get Target Info Via DHCP property to Enabled or Disabled to specify

an addressing method for the iSCSI target.

If you set the Get Target Info Via DHCP property to Disabled, specify the

Target IP Address, Target Port, and Boot LUN.

Note -

When iSCSI is enabled on a network port, PXE is disabled for that port.

Specify the Target Name in iSCSI Qualified Name (iqn) format, for example

iqn.1988-12.com.oracle:X6-2-target

Set the Authentication Type property to CHAP or None.

CHAP refers to Challenge-Handshake Authentication Protocol.

Select Save Changes.

Press the F10 function key to save your changes and exit the BIOS Setup Utility.

The server reboots.

Note -

The newly-configured iSCSI drive does not appear in the BIOS boot list until after you

install an operating system.

Related Information

■

“Select UEFI Boot Mode or Legacy BIOS Boot Mode (BIOS)” on page 47

Summary of Contents for X6 series































































































































Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands

Oracle X6 series, Administration Manual

Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands