Oracle X6 series Administration Manual Download

Page: 47 / 126

Select UEFI Boot Mode or Legacy BIOS Boot Mode (BIOS)

Viewing and Modifying Boot Properties

The BIOS Configuration screen appears.

Review the Boot Mode property.

To view the current boot mode in the Oracle ILOM command-line interface (CLI),

perform the following steps:

Log in to the Oracle ILOM CLI.

For instructions, see

“Accessing Oracle ILOM” on page 21

Type

show /System/BIOS boot_mode

Select UEFI Boot Mode or Legacy BIOS Boot

Mode (BIOS)

Caution -

If you change the boot mode after you have installed an operating system (OS), the

OS will not boot.

Access the BIOS Setup Utility.

For instructions, see

“Accessing the BIOS Setup Utility” on page 33

Navigate to the Boot menu.

The UEFI/BIOS Boot Mode property displays the current boot mode.

In the Boot menu, select UEFI/BIOS Boot Mode.

Summary of Contents for X6 series































































































































Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands

Oracle X6 series, Administration Manual

Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands