manualshive.com logo in svg

Oracle X6 series, Administration Manual

Share
Download
Oracle X6 series Administration Manual Download Page 21

Accessing and Using System Administration Tools

21

Accessing and Using System Administration

Tools

This section provides instructions for accessing and using the system administration tools.

Task

Link

Set up a management connection to the server, and then

launch and log in to Oracle ILOM.

“Accessing Oracle ILOM” on page 21

Download, install, and access Oracle Hardware

Management Pack.

“Accessing Oracle Hardware Management

Pack” on page 31

Access the BIOS Setup Utility and review BIOS key

mappings for serial terminals.

“Accessing the BIOS Setup Utility” on page 33

Accessing Oracle ILOM

Oracle ILOM can be used to configure the system and to monitor the health of the system. It is

firmware embedded on the service processor, and does not need to be installed. You can access

Oracle ILOM any time the system is connected to power, whether the host is operational or not.

You can access Oracle ILOM locally or remotely using a web interface or a command-line

interface (CLI). To get started, see the following sections:

■

“Oracle ILOM Management Connection Options” on page 22

■

“Cable the Server for a Management Connection to Oracle ILOM” on page 23

■

“Launch and Log In to Oracle ILOM Through a Remote Ethernet

Connection” on page 24

■

“Launching Remote KVMS Redirection Sessions” on page 26

Summary of Contents for X6 series































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands