Oracle X6 series, Administration Manual, Page: 24 / 126

Launch and Log In to Oracle ILOM Through a Remote Ethernet Connection
24 Oracle X6 Series Servers Administration Guide • April 2016
5.
To enable the Host-to-ILOM interconnect refer to one of the following:
■
Dedicated Interconnect SP Management Connection in the Oracle ILOM Administrator's
Guide for Configuration and Maintenance, Firmware Release 3.2.x .
■
Enabling the Host-to-ILOM Interconnect, Oracle Hardware Management Pack Installation
Guide .
Launch and Log In to Oracle ILOM Through a
Remote Ethernet Connection
Note -
To enable first-time login and access to Oracle ILOM, a default Administrator account
and its password are provided with the system. To build a secure environment and enforce
user authentication and authorization in Oracle ILOM, you must change the default password
(
changeme
) for the default Administrator account (
root
) after your initial login to Oracle ILOM.
If this default Administrator account has since been changed, contact your system administrator
for an Oracle ILOM user account with Administrator privileges.
Note -
To prevent unauthorized access to Oracle ILOM, create user accounts for each user. For
details, see “Adding Oracle ILOM User Accounts” on page 70 .
1. Ensure that a physical management connection to Oracle ILOM has been
established.
For instructions for establishing a physical management connection to Oracle ILOM see “Cable
the Server for a Management Connection to Oracle ILOM” on page 23 .
2. To launch and log in to the Oracle ILOM web interface, perform the following
steps:
a. Open a web browser window.
Ensure that the web browser is supported by Oracle ILOM. For more information, refer to
the Oracle ILOM User's Guide for System Monitoring and Diagnostics, Firmware Release
3.2.x .
b. Type the IP address or host name of the server in the browser address bar,
for example http://192.0.2.213.
The Oracle ILOM log in page appears.
c. Type your user name and password, and then click Log In.
If this is the first time you are accessing Oracle ILOM, use
root
for the user name and
changeme
for the password.