Oracle X6 series Page 105 Administration Manual Download

Page: 105 / 126

Back Up the Current Oracle ILOM Firmware Configuration (Oracle Hardware Management Pack)

Backing Up and Restoring Hardware and Firmware Configurations

105

Related Information

■

Updating the UEFI BIOS (

ubiosconfig

Oracle Server CLI Tools User's Guide

http://

www.oracle.com/goto/ohmp/docs

Back Up the Current Oracle ILOM Firmware

Configuration (Oracle Hardware Management

Pack)

Access the operating system command-line interface.

For more information, see

“Accessing Oracle Hardware Management Pack” on page 31

Use the

ilomconfig export

command:

ilomconfig export config --xmlfile=

filename

.xml

A prompt appears asking whether you want to specify a passphrase. The passphrase is used to

encrypt sensitive data in the backup file. If you specify a passphrase, the passphrase is required

to restore the backed up configuration. If you do not specify a passphrase, sensitive data will not

be included in the backup file.

If you choose to encrypt sensitive data in the file, type

, and then specify a

passphrase.

If you choose not to include sensitive data in the backup file, type

Related Information

■

Configuring Oracle ILOM (

ilomconfig

Oracle Server CLI Tools User's Guide

http://

www.oracle.com/goto/ohmp/docs

Restoring Saved Firmware Configurations

To recover from unwanted configuration changes, you can revert the server BIOS, Oracle

ILOM firmware, or RAID settings to a saved configuration. To load a configuration from a

previously exported XML file, see the following procedures.

■

“Restore a Saved BIOS Firmware Configuration (Oracle ILOM)” on page 106

■

“Restore a Saved Oracle ILOM Firmware Configuration (Oracle ILOM)” on page 107

■

“Restore a Saved BIOS Firmware Configuration (Oracle Hardware Management

Pack)” on page 109

Summary of Contents for X6 series































































































































Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands

Oracle X6 series, Administration Manual

Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands