Oracle X6 series Page 11 Administration Manual Download

Page: 11 / 126

Using This Documentation

■

Overview

: The

Oracle X6 Series Servers Administration Guide

describes administration

tools available for the Oracle Server X6-series servers. The guide also provides procedures

for performing common administrative tasks, such as powering the server on and off,

configuring storage resources, and installing an operating system.

■

Audience

: This document is written for technicians, system administrators, and authorized

service providers.

■

Required knowledge

:Users should have experience configuring and administering servers.

Product Documentation Library

Documentation and resources for this product and related products are available at:

■

Oracle Server X6-2

http://www.oracle.com/goto/x6-2/docs

■

Oracle Server X6-2L

http://www.oracle.com/goto/x6-2l/docs

Feedback

Provide feedback about this documentation at

http://www.oracle.com/goto/docfeedback

Summary of Contents for X6 series































































































































Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands

Oracle X6 series, Administration Manual

Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands